AFM Caulking Compound
Starting at: $21.98
Safecoat Caulking Compound is a not-toxic, elastic emulsion type caulking compound designed to replace oil caulk and putty for windows, cracks and general maintenance work. It will not dry out or crack and does not release any solvents or obnoxious odors. Safecoat Caulking Compound provides a water resistant, flexible, easy to install, non sag sealant with excellent initial and permanent adhesion.
As a ready to use elastomer, it can be applied to a variety of substrates and has high durability. Resin rich formula affords maximum bond strength.
Use for caulking windows, sealing cracks, filling holes, door perimeters, walls and woodwork, siding openings and masonry cracks. Requires a typical caulking gun found at any local hardware store.
- Effective, easy to use.
- Safely used by and for the chemically sensitive.
- Low odor, non-offensive to installer and occupant.
- 100% solids, will not shrink.
- Contains no formaldehyde.
1/4” x 1/4” (6.4mm x 6.4mm) width depth cross section can be filled at a rate of approximately 20 linear feet per tube.
- Requires a typical caulking gun found at any local hardware store. 10.1oz tube.
Approximately 6 month shelf life.
Available in white.
AFM Caulking Compound is a not-toxic, elastic emulsion type caulking compound designed to replace oil caulk and putty for windows, cracks and general maintenance work. It will not dry out or crack and does not release any solvents or obnoxious odors. Safecoat Caulking Compound provides a water resistant, flexible, easy to install, non sag sealant with excellent initial and permanent adhesion.
As a ready to use elastomer, AFM Caulking Compound can be applied to a variety of substrates and has high durability. Resin rich formula affords maximum bond strength.
USE ON:
This not-toxic, indoor/outdoor flexible emulsion type of caulking compound is designed to replace oil caulk and putty for windows, cracks, tub and shower enclosures and general maintenance. It will not dry out or crack and does not release any solvents or harsh odors. Provides a waterproof, easy to install sealant with excellent initial and permanent adhesion.
LIMITATIONS:
Safecoat products are made without formaldehyde preservatives. Do not contaminate. Store in airtight containers. Do not use when indoor temperature is below 55 degrees F. Do not freeze. Thick application, high humidity or conditions other than normal will cause Safecoat to dry and cure more slowly.
SURFACE PREPARATION:
Prime and seal surfaces completely before application of caulk to protect against undue absorption into substrate. All surfaces to receive caulk and overlays must be sound, intact and cleaned of any grease, oils, dust, dirt, wax, unsound prior caulk and other foreign materials.
APPLICATION:
Apply Safecoat Multi-Purpose Caulk directly from tube or container with no dilution. Install firmly into opening and joints pressing to insure contact with faces. Tool with knife or spatula to smooth and level the sealant surface using rubbing alcohol.
CLEAN-UP:
Clean tools and equipment while they are still wet with rubbing alcohol.
DRYING/CURING TIME:
Under normal conditions, 24 hours for full cure. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees F.
MSDS & Spec Sheet
Be the first to review “AFM Caulking Compound”
You must be logged in to post a review.
Questions & Answers
-
Would this be ok to use for cracks between the ceiling and wall? House just settled and there are cracks there now
-
Q Would this be ok to use for cracks between the ceiling and wall? House just settled and there are...... Read moreAsked by on February 16, 2024 3:50 PMAnswered by the admin
Yes, it can!
How many ounces is this?
-
Q How many ounces is this?Asked by on December 30, 2021 11:01 PMAnswered by the admin
10.1oz
Can this be used for caulking flooring perimeter in a bathroom? Is it flexible enough to allow for expansion and contraction of flooring?
-
Q Can this be used for caulking flooring perimeter in a bathroom? Is it flexible enough to allow fo...... Read moreAsked by on July 6, 2021 9:46 PMThere are no answers for this question yet.
I'm planning to re-caulk in my kitchen and am looking for almond colored caulk. Amazon sells Flex Shot with the following ingredients: Dimethylsiloxane, Silica, Methyltriacetoxysilane, Ethyltriaceloxysilane, Petroleum Distilates and Diflouroethane. I assume these ingredients are all toxic. I welcome your opinion. I've used your Chemlink DuraSil Neutral Cure Silicone Sealant in my bathroom but am looking for the almond colored caulk. I listen to your podcast and appreciate your experience and expertise!
-
Q I'm planning to re-caulk in my kitchen and am looking for almond colored caulk. Amazon sells Flex...... Read moreAsked by on January 27, 2021 7:31 AMAnswered by the admin
Hi there! Thanks you reaching out. Andrew Pace from Non Toxic Environments podcast readily consults for information like this! You can book an appointment here. Thank you for listening and we appreciate your interest!
Answered by the adminHi there! Thank you reaching out. Andrew Pace from Non Toxic Environments podcast readily consults for information like this! You can book an appointment here. Thank you for listening and we appreciate your interest!
voc
-
Q vocAsked by on October 26, 2020 12:23 PMThere are no answers for this question yet.
Related products
Reviews
There are no reviews yet.