Blue Bear Safenol Paint Stripper

Blue Bear Safenol Non Toxic Paint Stripper is an effective stripper without using Methylene Chloride or NMP. Using BLUE BEAR’s new Safenol™, this stripper effectively removes multiple layers of paint, varnish, enamel, urethane, other simple coatings, and lead-based paint. Paint Stripper is a safe, low odor, biodegradable, non-caustic coating remover for any DIY project

• • Removes Paints, Urethanes, Enamels, Sealers, Some Epoxies, Lead Paint, + More
  • SAFER! No NMP or Methylene Chloride
  • Non-Caustic and Biodegradable
  • Removes Multiple Layers in ONE Application

Use On:

Blue Bear Safenol Non Toxic Paint Stripper can be used on concrete, masonry, wood, metal, and fiberglass *Fiberglass must be attended. If left too long, Paint Stripper could degrade resin.

Do Not Use On:

PVC, drywall, limestone, plastic, veneer, terrazzo tile, or rubber

Usage Tips from the Pros:

• • Stripper can be reused if it maintains its gel consistency.
  • When used outdoors, or for longer dwell times, cover with a 2 mil or thicker plastic sheeting over the work area to help keep stripper wet and working.

Test Area:

• • Due to variances in surfaces and conditions, always test in a small, inconspicuous area before using on complete project.

Application:

• • Apply a thick layer of Blue Bear Paint Stripper w/Safenol by pouring, brushing, squeegee, or commercial airless sprayer.
  • Applying too thin will cause Paint Stripper to dry out before removal is complete.
  • Use a scraper to check if the coating is softened down to the surface. If not, wait longer and recheck.
  • When the coating is completely softened, remove with a scraper.

Clean Up:

• • Use Blue Bear Emerge General Purpose Degreaser, AFM Super Clean, or water and a scrub brush, mop, or power washer to clean remaining thin residue.
  • Remove excess coating(s) and Paint Stripper before using a power washer for final cleaning. Allow surface to dry before further preparations.

Coverage:

• • Coverage per square foot varies depending on type and age of coating, number of layers, and method of application.
  • Thickness of the stripper should exceed the thickness of coatings being removed.
  • Horizontal: Average coverage is 125 sq ft per gallon (max 200 sq ft per gallon)
  • Vertical: Average coverage is 75 sq ft per gallon

Biodegradable:

• • Meets or exceeds ASTM standards

Precautions:

• • Concrete surfaces may darken with use of Paint Stripper.
  • Protect plants and vegetation with a plastic drop cloth.
  • Always use care to prevent overspray from getting on surfaces other than the one being prepped or cleaned. Warnings: May cause eye irritation.
  • Keep out of reach of children.
  • Flash Point None pH Level 6.5 VOC (Volatile Organic Compounds) 3.1%, .25lb/g, 30g/l California and OTC Compliant
  • Ingredients: Dibasic ester, proprietary thickening, and surfactant blend safe for humans.