AFM Safecoat Metalcoat Metal Primer

AFM Safecoat Metalcoat Metal Primer can be used on interior and exterior metal surfaces such as galvanized and masonry, steel, aluminum and non-ferrous metal.

AFM Safecoat Metalcoat Metal Primer has very low odor and low VOC, making it one of the least toxic metal primers available, formulated without the heavy metals and other hazardous ingredients commonly used.

Provides a tough, flexible film, producing outstanding corrosion resistance and excellent adhesion. It is suitable as a finish in a three primer coat application. May be recoated with a variety of other finishes, and is an excellent foundation for Safecoat paints, today’s premium not toxic coating.

COVERAGE:

One gallon of AFM Safecoat Metalcoat Metal Primer covers approximately 300 square feet in one coat depending on method of application and surface texture.

THINNING:

None required. If thinning becomes necessary, use water sparingly.

CLEAN-UP:

Clean tools and equipment while still wet with a solution of SafeChoice Super Clean and warm water.

DRYING/CURING TIME:

Under normal conditions, AFM Safecoat Metalcoat Metal Primer dries to touch in 30 minutes and is recoatable after four hours. Normal conditions include a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55 degrees F. Thick application, high humidity or conditions other than normal will cause the product to dry and cure more slowly.